Basic Function - Samsung AQV09PSB Manual

Basic function

Basic operation is an operation mode that can be selected by pressing the Mode button.
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature
detected by the room temperature.
(COOL or HEAT) based on the room temperature at the start of the operation.
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot
season.
temperature to the desired coolness.
,
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air.
Dry mode makes the air feel refreshing in a humid climate.
To maximize the dehumidification capacity during the Dry operation, the air conditioner could be
operating at lower or higher temperature than the remote controller set temperature.
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
warming up.
,
outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats
insufficiently.
10
Maldive EUR_AQV09P@_IBIM_32436A_E.indd 10
) makes the noise quieter during operating the indoor unit in the Cool mode.
) makes the noise quieter during operating the indoor unit in the Heat mode.
2010-11-11 15:01:52