Table of Contents
Advertisement
for Camera File system" universal standard
established by the JEITA (Japan Electronics
and Information Technology Industries
Association).
On your camcorder, you cannot play back
photos recorded on other devices (DCR-
TRV900 or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
If you cannot use memory card that have been
used with another device, format it with your
camcorder (p. 98). Note that formatting erases
all information on the memory card.
You may not be able to play back images with
your camcorder:
When playing back image data modified on
your computer
When playing back image data recorded with
other devices
About the "Memory Stick" media
Types of "Memory Stick" media
"Memory Stick Duo"
media (with MagicGate)
"Memory Stick PRO
Duo" (Mark2) media
"Memory Stick PRO-HG
Duo" media
This product does not support 8-bit parallel
*
data transfer but it supports 4-bit parallel data
transfer the same as with "Memory Stick PRO
Duo" media.
This product cannot record or play data that
uses "MagicGate" technology. "MagicGate" is
a copyright protection technology that records
and transfers the contents in an encrypted
format.
About the "InfoLITHIUM" battery
pack
Your camcorder operates only with an
"InfoLITHIUM" V series battery packs.
"InfoLITHIUM" V series battery packs
have the
US
1
Recording/Playback
*
mark.
What is an "InfoLITHIUM" battery pack?
An "InfoLITHIUM" battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your camcorder
and an AC Adaptor/charger (sold separately).
The "InfoLITHIUM" battery pack calculates the
power consumption according to the operating
conditions of your camcorder, and displays the
remaining battery time in minutes.
The battery pack NP-FV70 is compatible with
"ActiFORCE. "
"ActiFORCE" is a new generation power
system. Battery capacity, boost charge, and
the speed and accuracy of battery time
remaining calculations have been improved
when compared with current "InfoLITHIUM"
P-series battery.
To charge the battery pack
Be sure to charge the battery pack before you
start using your camcorder.
We recommend charging the battery pack in an
ambient temperature of between 10
(50 °F to 86 °F) until the /CHG (flash/charge)
lamp turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
To use the battery pack effectively
Battery pack performance decreases when the
ambient temperature is 10
and the length of time you can use the battery
pack becomes shorter. In that case, do one
of the following to use the battery pack for a
longer time.
Put the battery pack in a pocket to warm it
up, and install it on your camcorder right
before you start taking shots.
Use a large capacity battery pack: NP-FV70
(supplied) or NP-FV100 (sold separately).
Frequent use of the LCD screen or a frequent
playback, fast forward or reverse operation
wears out the battery pack faster. We
recommend using a large capacity battery
pack: NP-FV70 (supplied) or NP-FV100 (sold
separately).
C to 30
C
C (50 °F) or below,
Advertisement
Table of Contents
