Using The Administrator Settings - Sharp MX-M260 Operation Manual

USING THE ADMINISTRATOR SETTINGS

When using the administrator settings for the first time, change the factory default administrator password to a
Note
new code. (Step 3 to step 5)
1
Press the [SYSTEM SETTINGS] key.
DATA
LINE
DATA
OB STATUS SYSTEM SETTINGS
2
Touch the [ADMINISTRATOR
SETTINGS] key.
SYSTEM SETTINGS
DISPLAY
TOTAL COUNT
CONTRAST
ADDRESS
TRAY SETTINGS
CONTROL
KEYBOARD
ADMINISTRATOR SETTINGS
SELECT
3
Use the numeric keys to enter the
five-digit administrator password.
ADMINISTRATOR PASSWORD
4
Touch a key to select the desired
category of administrator settings.
SYSTEM SETTINGS
ACCOUNT
ENERGY SAVE
CONTROL
COPY SETTINGS PRINT SETTINGS
CHANGE ADMINISTRATOR
LIST PRINT
PASSWORD
Example:
To change the administrator password, touch the
[CHANGE ADMINISTRATOR PASSWORD] key.
• Each time you need to configure a program, use this
procedure to select the program.
• In the following steps, the setting screen for the
selected program appears. Refer to the explanation
of the program to select the desired setting (the
explanations of the programs begin on page 103).
EXIT
LIST PRINT
CLOCK
FAX DATA
RECEIVE MODE
FORWARD
Each time a digit is
entered, the dash (-) that
indicates the digit will
change to an asterisk ( ).
EXIT
OPERATION
DEVICE CONTROL
SETTINGS
SCANNER
FAX SETTINGS
SETTINGS
PRODUCT KEY
5
Use the numeric keys to enter the new
5-digit administrator password.
22222 -----
account number cannot be used). The entered number
will be the new administrator password. Be sure to
remember this number.
6
Touch the [OK] key. You will return to
the screen of step 4.
OK
7
Press the [CLEAR ALL] key (
exit the setting.
Use a number for the
administrator password
that has not been
programmed as an
account number for
auditing mode (a number
that has been
programmed as an
This completes the
procedure for changing
the administrator
password. If you wish to
configure another
program, touch the key of
the desired program in the
screen of step 4.
) to
97
6