Failure Modes - Metrologic Eclipse MS5100 Series Installation And User Manual

F M
AILURE ODES
14
One Razzberry Tone on Power-up
This indicates the scanner has experienced a laser or flipper
subsystem failure. Return the unit for repair to a Metrologic
Authorized Service Center.
Continuous Razzberry Tone with all LEDs off
If, upon power up, the scanner emits a continuous razzberry
tone, then the scanner has an experienced an electronic
failure. Return the unit for repair to a Metrologic Authorized
Service Center.
Three Beeps – on power up
If the scanner beeps 3 times on power up then, the non-volatile
memory (NovRAM) that holds the scanner configuration has
failed. Return the unit for repair to a Metrologic Authorized
Service Center.