Troubleshooting Guide; Maintenance; Replacement Parts - Hamilton Beach Tango Series Operation Manual

Troubleshooting Guide

Problem . . .
Blender fails to start
or stops while it is
running and cannot
be restarted
Ingredients will not mix
properly
Model 91350 fails to
start when switch is
depressed.

Maintenance

Inspect the blender and its various parts and replace as follows:
Daily Unplug the blender and remove the container from the base, and then inspect the
container and cutter unit assembly for wear, nicks, and broken or loose blades. Replace if
necessary. If the blades are loose, discontinue use immediately and replace the blades.
Do not attempt to repair or tighten the cutter assembly. See "Replacement Parts" below.
Weekly Unplug the blender, and then inspect the power cord insulation and power plug for cracks.
Refer to "Requesting Assistance or Service" for repair or replacement.
Yearly Replace the container and cutter assembly at least once a year.
See "Replacement Parts" below.

Replacement Parts

Refer to "Requesting Assistance or Service" to order parts below.
Model
91300/91350
91300/91350
Solution . . .
• Check to see if unit is securely plugged into an electric outlet.
• Check to see if the fuse for the electric outlet has blown or if a circuit breaker
has tripped.
• Check to see if enough liquid has been added to the ingredients. Mixture should
be fluid and free-running at all times.
• Solid pieces are too large. Pieces should not exceed 1" cubes.
• Container is too full. Do not fill past highest graduation marking.
• Cutter unit blades are not sharp or are damaged. Inspect
container and cutter assembly daily. Replace container and
cutter assembly at least every 12 months or sooner if cutter assembly appears
worn or damaged.
• Check to see if cutter assembly is installed properly.
• Select speed to create a fluid blend.
• Depress switch to the Off position, then release. Then turn blender On according
to the instructions.
Part Description
1 container
Cutter assembly
Caring for the Blender
Part Number
6126-91300
99200
9