ProForm 610RT PFTL06711.0 User Manual page 8

2. Attach a Wheel (95) to the Base (94) with a 3/8"
x 3" Bolt (67), two Wheel Spacers (96), and a
3/8" Nut (10). Do not overtighten the Nut; the
Wheel must turn freely.
3. Identify the Right Upright (83), which is marked
with a "Right" sticker. Have a second person
hold the Right Upright near the Base (94).
See the inset drawing. Tie the wire tie in the
Right Upright (83) securely around the end of
the Upright Wire (85). Then, pull the other end
of the wire tie until the Upright Wire is routed
through the Right Upright.
2
67
96
95
10
96
3
85
Wire Tie
83
Wire
85
Tie
8
94
83
85
94