Error Indications And Fault Occurrence Causes - Epson Stylus NX100 Service Manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119

3.2 Error Indications and Fault Occurrence Causes

This chapter describes how the printer indicates an error status with LEDs, and why the error is caused, when a problem happened during each sequence/operation (power-on
sequence, paper feeding, ink drawing, and so on).
Error Name
Fatal error (scanner)
Fatal error (printer mechanism)
Maintenance error (waste ink overflow)
Paper jam error
Paper out error
Double feed error
Ink out error / No ink cartridge error/
Ink cartridge detection error
Note : --: No change
Flashing: Repeats ON and OFF every 1.25 seconds.
High-speed flashing: Repeats ON and OFF every 0.5 second.
TROUBLESHOOTING
Table 3-1. Error Indications and Fault Occurrence Causes
LED Indications
Power Paper Ink
High-speed High-speed High-speed • RAM trouble occurs.
flashing flashing flashing
• System trouble occurs.
Mechanical trouble occurs.(CR error, PF error etc.)
Flashing Flashing Flashing
Flashing ON ON The waste ink counter exceeds to capacity.
-- Flashing OFF Paper stays in the paper path after paper ejection.
-- ON OFF Failure to load paper to print.
-- Flashing OFF Double feed during double sided printing.
• The cartridge has run out of ink.
• The printer could not detect the cartridge.
-- OFF ON
• The printer detected non-Epson cartridge.
• Writing to/reading from the CSIC could not be made.
Error Indications and Fault Occurrence Causes
Error Cause
Revision C
Reference
Table 3-2. (p35)
Table 3-3. (p41)
Table 3-4. (p42)
Table 3-5. (p45)
Table 3-6. (p47)
Table 3-7. (p48)
34
Confidential