Oster BLSTPYG1209B Instruction Manual page 17

U S IN G YOU R B L E N D - N - GO
(M ODELS WITH BLE ND - N-GO ACC ESSORY ONLY)
IMPORTANT: PLEASE MAKE SURE TO USE THE FOLLOWING PARTS FOR THE
BLEND-N-GO CUP:
B
Blend-N-Go Cup
with Lid
A. Locking Lever
B. Anti-Rotation Tabs
C. Blender Base
Ensure the locking sealing ring is fully and evenly tucked in
place and holding the blade assembly to the threaded cup
bottom. For correct assembly see (Fig. 3).
NOTE: For proper installation onto blender motor base, make
sure locking lever rotates past the anti-rotation tabs on the
Blend-N-Go cup.
WARNING: DO NOT PROCESS HOT FOODS OR LIQUIDS IN THE BLEND-N-GO CUP.
You're now ready to enjoy your blended drink!
A
Blend-N-Go Cup
and Threaded
Cup Bottom with
Locking Lever
E n g l i s h- 8
NOTE: Threaded Cup Bottom
with Locking Lever MUST be
used with Blend-N-Go cup.
Incorrect
C
Correct!
Fig. 3