Oster BLSTPYG1209B Instruction Manual page 14

Be sure the integrated blade assembly is tightened to the jar before using.
NOTE: For proper installation onto blender motor base, make sure locking lever rotates
past the anti-rotation tabs on the blender jar or Blend-N-Go cup. See (Fig. 4).
CAUTION: If locking lever is damaged or missing, do not operate blender, and
contact Customer Service for a replacement.
5. Put the ingredients into the jar.
6. Secure the lid and filler cap.
7. Place the jar onto the base.
8. Plug the power cord into a standard household outlet of the same voltage as the one
indicated in the rating plate of your blender. You are now ready to start.
Using the Automatic Programs
1. Press the ON/OFF (
blink, indicating the product is active and ready for use. The light will stay on when
the motor is running.
2. Select and press the desired automatic pre-programmed setting button:
· Juices and Smoothies (JUGOS Y SMOOTHIES) - Perfect for blending any kind of
beverage
· Food Chop (PROCESADOR DE ALIMENTOS) – Allows to slice, shred or chop
ingredients in blending jar (I.e. soups, purees, salsas, etc.)
3. To change your selection, press ON/OFF (
Pre-Programmed Setting button Juices / Smoothies or Food Chop ("JUGOS Y
SMOOTHIES" or "PROCESADOR DE ALIMENTOS").
4. Once the program is complete the product automatically stops. Please note: You
may press the ON/OFF (
green light indicates that the blender is ready.
5. Press the ON/OFF (
programmed to turn off automatically if not used for a period of several minutes. All
lights will turn off when the unit automatically powers down.
Using the Manual Controls
Manual Controls include:
1 - Low Speed
2 - Medium Speed
3 - High Speed
Pulse (PULSO)
Use these controls for personal recipes or to continue blending after an automatic
program is finished.
1. Press the ON/OFF (
blink, meaning the product is active and ready for use. The light will stay on when the
motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
Low
1. Press the "1" button to run the product at a low speed.
2. Press the ON/OFF (
) power button to turn the product on. The power light will
) twice followed by another
) button to cancel the program at any time. The blinking
) power button to turn the product off. This product is pre-
) power button to turn the product on. The power light will
) power button to turn the product off.
E n g l i s h -5