Datalogic Heron D-130 Quick Reference Manual

Datalogic ADC, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007-2015 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic"
or "Datalogic ADC"). Owners of Datalogic products are hereby granted a non-exclusive,
revocable license to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices, including
copyright notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our
website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time
without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S.A. and the E.U. All other trademarks and trade
names referred to herein are property of their respective owners.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
www.datalogic.com and click on the links indicated for further information including:
• PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities including:
- Datalogic Aladdin™ a multi-platform utility program that allows device configuration
using a PC. It provides RS-232 interface configuration as well as configuration
barcode printing.
• SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and Technical
Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
• CONTACT US
Information Request Form and Sales & Service Networks
DECLARATION OF CONFORMITY
EC-030
Datalogic ADC Srl, Via S. Vitalino, 13
Rev.: 4
Lippo di Calderara di Reno (BO) 40012 Italy
Pag.: 1 di 1
13
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl
per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:
HERON D1XX ; Barcode Reader
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
2004/108/EC – EMC Directive
2011/65/EU – RoHS Directive
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (C B ITE), S 2006: L M M
LASS EPTEMBER IMITS AND ETHODS OF EASUREMENTS OF
A A1: O 2007: D C
MENDMENT CTOBER ISTURBANCE HARACTERISTICS OF
T E
ECHNOLOGY QUIPMENT
EN 55024, S 1998: I T E
EPTEMBER NFORMATION ECHNOLOGY QUIPMENT
A A1:2001+A2:2003: I C
MENDMENT MMUNITY HARACTERISTICS
L M M
IMITS AND ETHODS OF EASUREMENT
EN 50581, S 2012: T D
EPTEMBER ECHNICAL OCUMENTATION FOR THE
OF E LECTRICAL AND E LECTRONIC P RODUCTS WITH
R ESPECT TO THE R ESTRICTION OF
S UBSTANCES
Lippo di Calderara, March 29th, 2013 Ruggero Cacioppo
Quality & Reliability Manager – Europe
™
Heron
D130 READERS
QUICK REFERENCE GUIDE
820074014 (Rev. J) April 2015
CHINA ROHS STATEMENT
R
ADIO
I
NFORMATION
A
SSESSMENT
H AZARDOUS
CONNECTIONS
USB
WEDGE
RS-232
PEN
COMPLIANCE
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2001.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the reader or else be supplied by a UL Listed/CSA
Certified Power Unit marked "Class 2" or LPS power source rated 5 V, minimum 180
mA, which supplies power directly to the reader via the power connector of the
cable.
WEEE COMPLIANCE
For information about the disposal of Waste Electrical and
Electronic Equipment (WEEE), please refer to the website at
www.datalogic.com.
CUSTOMS UNION
The CU conformity certification has been achieved; this allows the Product to bear
the Eurasian mark of conformity.
DISCONNECTING THE CABLE
PATENTS
See www.patents.datalogic.com for patent list
This product is covered by one or more of the following patents:
Utility patents: EP0789315B1, EP0851378B1, EP0895175B1, EP0926620B1, EP0997760B1,
EP1128315B1, EP1164536B1, EP1205871B1, EP1205873B1, EP1396811B1, EP1413971B1,
US5992740, US6260764, US6305606, US6712271, US6808114, US6834806, US6871785,
US6997385, US7075663, US7387246, USRE41349.
DATALOGIC ADC LIMITED FACTORY WARRANTY
Warranty Coverage
Datalogic warranties this product against defects in workmanship and materials, for a period of 5
years from the date of shipment, provided that the product is operated under normal and proper
conditions.
Datalogic ADC ("Datalogic") hardware products are warranted against defects in material and
workmanship under normal and proper use. The liability of Datalogic under this warranty is
limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty
and restore the product to its normal operating condition. Repair or replacement of product during
the warranty does not extend the original warranty term. Products are sold on the basis of
specifications applicable at the time of manufacture and Datalogic has no obligation to modify or
update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at
its sole option repair or replace the product without additional charge for parts and labor, or credit
or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may
use new or reconditioned parts, components, subassemblies or products that have been tested
as meeting applicable specifications for equivalent new material and products. Customer will
allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall
extend from the date of shipment from Datalogic for the duration published by Datalogic for the
product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices
against defects in workmanship and materials on the repaired assembly for a 90 day period
starting from the date of shipment of the repaired product from Datalogic or until the expiration of
the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not
responsible for, the maintenance of, damage to, or loss of configurations, data, and applications
on the repaired units and at its sole discretion can return the units in the "factory default"
configuration or with any software or firmware update available at the time of the repair (other
than the firmware or software installed during the manufacture of the product). Customer accepts
responsibility to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the
claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic
a return authorization number (RMA) for return of the product to a designated Datalogic service
center. If Datalogic determines Customer's claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be responsible for packaging and
shipping the product to the designated Datalogic service center, with shipping charges prepaid.
Datalogic shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Datalogic service center is located. Customer shall be responsible for
paying all shipping charges, duties, taxes, and any other charges for products returned to any
other locations. Failure to follow the applicable RMA policy, may result in a processing fee.
Customer shall be responsible for return shipment expenses for products which Datalogic, at its
sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by
other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by
faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper
storage or use of parts or accessories not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other
instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper maintenance,
including but not limited to cleaning the upper window in accordance with product
manual;
(v) any defect or damage caused by natural or man-made disaster such as but not
limited to fire, water damage, floods, other natural disasters, vandalism or abusive
events that would cause internal and external component damage or destruction of
the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for example
firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other
degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch
screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except
to a purchaser or transferee of product. No attempted assignment or transfer in violation of this
provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE
FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE
REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET
FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE
LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY
INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES
REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY
OF SUCH DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall
assume risk of loss or damage for product in Datalogic's possession. In the absence of specific
written instructions for the return of product to Customer, Datalogic will select the carrier, but
Datalogic shall not thereby assume any liability in connection with the return shipment.