Verifying The Upgrade - Extreme Networks ReachNXT 100-8t User Manual

Upgrading the ReachNXT 100-8t Firmware

Verifying the Upgrade

After the firmware has been upgraded, use the show lldp neighbors detailed CLI command to verify
that the new firmware version is installed.
# show lldp neighbors detailed
-----------------------------------------------------------------------------
LLDP Port 25 detected 1 neighbor
Neighbor: 00:04:96:1F:A8:00/9, age 19 seconds
- Chassis ID type: MAC address (4)
Chassis ID
- Port ID type: ifName (5)
Port ID
- Time To Live: 120 seconds
- System Name: "Reach 100-8t 800284-00-01 0840G-00560"
- System Description: "Reach 100-8t 1.6.1.6"
22
: 00:04:96:1F:A8:00
: "9"
ReachNXT 100-8t User Guide