Pairing A Replacement Wireless Camera - Night Owl WNVRC20 Series User Manual

4.2 Pairing a Replacement Wireless Camera

By default, each camera within your Wireless NVR kit comes pre-paired to the Wireless NVR. Additionally,
your wireless NVR has its own built-in Wi-Fi for secure, uninterrupted video transmission and recording.
Pairing allows for the wireless transmission coming from the camera to be detected by the Wireless NVR.
However, if you have a camera that needs to be replaced while under warranty, the replacement camera
will similarly need to be paired to the NVR.
NOTE: When pairing a Night Owl add-on camera, refer to "Add-on cameras Quick Setup Guide".
To pair a replacement camera to your NVR, please use the below steps:
Power on the replacement camera using
1
the camera power adapter.
NOTE: This should be done locally at the NVR to
avoid interference.
With the NVR connected to a TV/Monitor,
2
right click on your mouse and navigate to
the Main Menu using the options bar.
3
Go to the Camera Menu and Select the Add
A
Camera tab on the left side of the menu.
The top portion of the screen will list
B
cameras that have been found but not yet
paired.
The bottom portion of the screen will show
C
all cameras that are currently paired to the
NVR.
NOTE: The location of the camera reset button may vary.
B
A
C
16