Table of Contents
Advertisement
CloudBook
3.
Connect the monitor power cable and plug it into a properly grounded
wall outlet.
4.
Turn on the power of the monitor.
5.
Turn on your CloudBook. Both the LCD panel and the monitor screen
will show the display. Your computer is set at default to run at
simultaneous display mode.
6.
If you only want to show the display on the external monitor and shut off
the LCD display, you can use the <Fn> + <F3> hot-key to switch
display type between LCD and external monitor. Keep pressing the hot-
key until you get the display to external monitor only.
+
Refer to Chapter 3 regarding the possible External CRT resolutions and
how to change the display properties.
5.3
Using the External Audio System
At the right side of your CloudBook, you will find the built-in audio ports. You
can connect Microphone jacks, earphone or powered speaker.
To connect to an audio jack:
58
User Guide
Advertisement
Table of Contents
