Table of Contents
Advertisement
To connect the power adapter:
1.
Plug the AC power cord into the power socket of the AC power adapter.
2.
Plug the other end of the AC power cord to a live AC wall outlet.
3.
Plug the connector of the AC adapter to the DC-IN port found at the
right side of the CloudBook.
+
Whenever possible, it is advisable to always have the AC adapter connected
to the CloudBook and the battery pack installed. This ensures continuous
power supply and prevents any data loss incurring from sudden power
breakdown.
+
For the power supply of this equipment, an approved power cord has to
be used.
Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
Before cleaning the CloudBook, make sure it is disconnected from any
external power supplies (i.e. AC adapter).
2
Getting Started
33
Advertisement
Table of Contents
