Advertisement
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1
(See Exploded Diagram)
A.) Attach each end of the Main Frame (#1) to the Stabilizers (#2). Secure each end with
two M10 x ¾" Allen Bolts (#5) and ∅ ¾" Washers (#9).
B.) Attach two L-shaped Brackets (#3) to the holes on the Main Frame. Secure the
Brackets with one M10 x 4" Allen Bolt (#6), two Ø ¾" Washers (#9), and one M10
Aircraft Nut (#8). Repeat the same procedure to install other Brackets. Do not tighten
the Brackets yet.
C.) Place the Seat Pad (#4) onto the Main Frame. Align the holes to the Brackets. Secure it
with six M8 x ¾" Allen Bolts (#7) and Ø 5/8" Washers (#10). Securely tighten all Nuts
and Bolts previously installed.
4
EXPLODED DIAGRAM
Advertisement
