FUNAI TD6D-D500GB Owner's Manual page 73

DVB Setting
Setup A General Setting A DVB Setting
You can make settings of the digital tuner from the DVB
Setting.
A
Adult Lock
B
Maturity Lock
C
Language
D
About
A Adult Lock (Default: OFF)
DVB
You can set "Adult Lock" to "ON" or "OFF" and also
change Pincode.
Select "ON" or "OFF" using [K \ L], then
1
press [ENTER\OK].
Adult Lock
ON
OFF
2
To set "Adult Lock" to "ON":
1) Enter your desired Pincode using
[the Number buttons], then press [ENTER\OK].
2) For confirmation, enter the Pincode again using
[the Number buttons] then press [ENTER\OK].
To set "Adult Lock" to "OFF":
Enter the Pincode using [the Number buttons].
• While entering the Pincode, use [0] or [CLEAR] to
clear the numbers once entered.
Note
• Once "Adult Lock" has been set to "ON", Pincode will be
required in order to view the locked channels or make
the timer recording of them, and when you try to execute
the "Auto Tuning" for DVB or "Edit Channels".
• If you forget the Pincode, press [4], [7], [3], [7] to cancel
the Pincode.
B Maturity Lock (Default: OFF)
DVB
According to the age rating signal which comes with each
DVB programme, you can lock each programme.
Select "Maturity Lock" using [K \ L], then
1
press [ENTER\OK].
• If "Adult Lock" is set to "ON", enter the Pincode to
proceed to next step.
Select the desired rating using [K \ L], then
2
press [ENTER\OK].
• Select "OFF" to disable "Maturity Lock".
Maturity Lock
• Once "Maturity Lock" has been set, Pincode will be
required in order to view the programme that exceeds
the age restriction.
• In order to activate "Maturity Lock", "Adult Lock" has
to be set to "ON". To set "Adult Lock", refer to "A Adult
Lock (Default: OFF)" on page 73.
Setup A General Setting A Reset All
Select "Yes" using [K \ L], then press [ENTER\OK].
"Are you sure?" will appear. Select "Yes" using [K \ L], and
then press [ENTER\OK].
Note
• The settings listed below will remain unchanged even after
OFF
C Language
DVB
Language
Audio
Subtitle
Audio : Set the Audio language.
Subtitle : Set the Subtitle language.
Note
• The Audio and Subtitle setting may not be available for
some broadcast.
• To change the audio language, refer to "Multi Audio" on
page 26.
• To display the subtitle or choose the subtitle language,
refer to "Subtitle" on page 27.
D About
DVB
You can check the current DVB system software version
of this unit.
Reset All
Reset to factory default?
Yes
No
resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
®
- DivX VOD code
- Timer programmes
- OSD language setting
- DVB setting
73
EN