FUNAI TD6D-D500GB Owner's Manual page 23

Auto Tuning (DVB)
DVB
You can programme the tuner to scan only the DVB channels
that you can receive in your area.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K \ L], then press [ENTER\OK].
2
Select "Channel" using [K \ L], then press
[ENTER\OK].
3
Select "DVB Channel Setup" using [K \ L], then
press [ENTER\OK].
4
Select "Auto Tuning" using [K \ L], then press
[ENTER\OK].
The unit will start storing channels available in your area.
DVB Channel Setup
Edit Channels
Auto Tuning
Manual Tuning
Signal Information
The tuner scans and memorises all the active DVB
channels (TV / Radio) in your area.
Channel Search
S.No. TV Channel
14 E4
13 More4
32 Film4+1
28 ITV4
75 CITV
34 SETANTA SPORT
Channel 69 UHF
Progress
Exit
OK
5
Press [ENTER\OK] to exit.
• After auto tuning is completed, the lowest memorised
DVB channels appears on the screen.
• You can use [PROG. G \ H] to change the DVB
channels.
Note
• If you press [RETURN\BACK] or [SETUP] during the
scanning, auto tuning will be cancelled.
S.No. Radio Channel
102 Teletext Cars
729 RadioMusicShop
728 Heart
858000KHz/8M
100%
RETURN Back
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and individually.
1
Follow steps 1 to 3 in "Auto Tuning (DVB)" on
page 23.
2
Select "Manual Tuning" using [K \ L], then
press [ENTER\OK].
3
Select your desired position number using
[K \ L], then press [ENTER\OK].
Channel Auto
• The tuner will begin to search up or down automatically.
When a DVB channel is found, the unit will stop
searching.
• When "Auto" is selected, the unit will search for the
channels which have not been stored in channels
memory.
4
Press [SETUP] to activate the setting.
Service Update
DVB
This unit has "Service Update" function which searches and
stores newly available digital channels automatically at 8:00. If
a new channel is found, a message will appear on the screen
when you turn on the DVB channel at first time after storing a
new channel. Press any button to clear the message.
Country Setting
DVB ANALOG
You can set the country for receiving your local channels
properly. This setting is mainly for digital channels.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K \ L], then press [ENTER\OK].
2
Select "Channel" using [K \ L], then press
[ENTER\OK].
3
Select "Country" using [K \ L], then press
[ENTER\OK].
4
Select your desired country using [K \ L], then
press [ENTER\OK].
Country
France
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Czech Republic
Other
Digital channels cannot be received properly for the
countries not listed above.
In such case, select "Other".
5
Press [SETUP] to exit.
23
EN