FUNAI TD6D-D500GB Owner's Manual page 38

Settings for External Equipment
Video Colour System
When you record from external equipment or copy a
videotape to an HDD/DVD disc, you can set the format Auto,
PAL or SECAM.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K \ L], then press [ENTER\OK].
2
Select "Recording" using [K \ L], then press
[ENTER\OK].
3
Select "Video Colour System" using [K \ L],
then press [ENTER\OK].
4
Select "Auto", "PAL" or "SECAM" using [K \ L],
then press [ENTER\OK].
General Setting
Playback
Auto Chapter
Display
Recording Audio Select (XP)
Video
Auto Finalise
Recording Video Colour System
Aspect Ratio (Video mode)
Clock
Auto
Bilingual Recording Audio
Channel
PAL
External Input Audio
DivX
SECAM
Video Colour System
HDMI
DVB Setting
Reset All
Auto: The video colour system will be set
automatically according to the recording
material.
PAL: The video colour system will be set to PAL.
SECAM: The video colour system will be set to
SECAM.
5
Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or SECAM
is detected, an error message appears on the screen and
recording will be paused. Recording will be resumed when a
PAL or SECAM signal is detected.
38
EN
Recording from External Equipment
Video
HDD HDD HDD
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
Before recording from external equipment, see page 19 for
connection instructions.
1
Turn on the TV and be sure to select the input to
which the unit is connected.
If you want to record to the HDD, press [HDD].
If you want to record to a disc, press [DVD] and insert
a recordable disc.
If you want to record to a videotape, press [VCR] and
insert a recordable videotape.
2
Select the input terminal to which the external
equipment is connected (AV1 or AV2).
Press [INPUT SELECT] repeatedly to select the external
input mode, then press [PROG. G \ H] repeatedly to
select AV1 or AV2.
3
Select a recording speed using [REC SPEED].
(See pages 28, 74.)
4 Press [RECORD I] on the unit to start
recording.
5 Press the [PLAY B] button on the external
equipment.
6 Press [STOP C] (HDD/DVD) or
[STOP\EJECT C A] (VCR) on the unit to stop
recording.
Note
• During recording, recording will be paused when a signal
other than PAL or SECAM is detected. (See "Video Colour
System" on page 38 for details.)
• The signal from the external device will be output
automatically when the TV is connected to AV1 and the
external device is connected to AV2 using a Scart cable with
its power on. (However, it will not be output when this unit's
power is turned off.)
• If you want to monitor this unit's signal, press [DISPLAY]
or turn the external device off. (The signal from this unit can
only be monitored during playback.)
If you want to monitor the signal from other input, press
[DISPLAY], then press [INPUT SELECT] to select the
desired external input mode, then select the desired input
channel using [PROG. G \ H].
VR
VCR VCR
DVD-R DVD-R DVD-R