Table of Contents
Advertisement
Hardware Overview
1
3
Reset: loading factory default configuration by pressing the button, which is
1.
inside this hole. Please insert the keen-edged device to the hole for 10 seconds.
RS485(Pelco-P/Pelco-D): RS 485 Connector functionally reserved for PTZ
2.
control.
Power LED: Power LED will light up when power is ON.
3.
Ethernet RJ-45 port: Connect to LAN via this standard RJ-45 connector.
4.
Power 12VDC: Connect with power adaptor
5.
Video Out: Loopthrough connection to the video signal from the Video In
6.
connector. Terminated with a coaxial/BNC connector.
Alarm In/Out: Connect to Alarm In/Out device.
7.
7
2
4
5
6
Advertisement
Table of Contents
