Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Advertisement
Table of Contents
Related Manuals for EverFocus EVS110
Summary of Contents for EverFocus EVS110
- Page 1 IP 99 Series EVS110 1CH Video Server EIP220 Network Camera User’s Manual Copyright © EverFocus Electronics Corp, Version Release: Dec. 2008...
- Page 2 - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment, not expressly approved by EverFocus or parties authorized by EverFocus could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the...
- Page 3 About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.
- Page 4 Sun Microsystems, Inc. in the United States and other countries. Support If the unit ever needs repair service, the customer should contact the nearest EverFocus Electronics Corp. Service Center for return authorization and shipping instruction. Minimum Computer Requirements: -CPU: PC Pentium IV (2.0 GHz or higher) / AMD Athlon (or higher)
- Page 5 IP99 series For example: (This web site may change without notices.) http://www.microsoft.com/downloads...
-
Page 6: Table Of Contents
TABLE OF CONTENTS 1. STARTING THE CAMERA OR VIDEO SERVER ... 7 1.1 I IP99 NSTALL SEARCHER IN 1.2 A SSIGN ADDRESS 1.3 A CCESSING THE CAMERA 1.4 R ESET AND ACTORY 2. IP99 SYSTEM OPERATION ... 9 2.1 A ... - Page 7 3.12 PTZ ... 26 SETTING 3.13 A ... 27 DMINISTRATOR 3.14 C ... 28 HANGE PASSWORD 3.15 S ... 28 PECIAL SETTING 3.16 M ... 29 AINTENANCE 4. FREQUENTLY ASKED QUESTIONS ... 30 4.1 I HAVE PROBLEM RECORDING AND PLAYBACK ON IP99 series INDOWS ISTA...
-
Page 8: Starting The Camera Or Video Server
1. Starting the camera or video server 1.1 Install IP99 searcher in PC Though you can simply enter 192.168.1.99 in IP address bar to access camera when you connect to only one IP99 device.( Default IP address is: 192.168.1.99 Port is: 80). However, it is recommended that you use IP search to manage IP camera and encoder. -
Page 9: Accessing The Camera
IP99 series Note: Please consult your network administrator for avoiding IP address conflict Diagram 1.2 Assign new IP address 1.3 Accessing the camera Double click selected camera in IP99 searcher or Enter IP address in IP address bar, as shown in diagram 1.3: Diagram 1.3 enter IP address Enter IP address and click Enter to confirm, login window will pop up as shown in diagram 1.4:... -
Page 10: Reset And Factory Default
IP99 series In login window, enter user name and password, （default user name is admin, password is 11111111）. Click“Confirm＂button to enter web window, as shown in diagram 1.5: Diagram 1.5 Camera Web page 1.4 Reset and Factory Default You can physically push” RST” button on IP99 camera or click “Default” on IP searcher to back to factory default. -
Page 11: Add More Videos
2.1 Add more videos If you wish to add one video display in the same web page, click “Add New” button, as shown in diagram 2.2: Diagram 2.2 Add video display 2.2 Change video resource You can change video resource and simultaneously view multiplies cameras and encoders at same time. -
Page 12: Edit And Change Display Layout
IP99 series 2.3. Edit and Change Display Layout 2.3.1 Edit layout If you wish to add more video displays, please click , then interface changes to ，you can freely set the layout of video display in this window. Enter the number of channels you want for each row. Use comma to separate them. And click to make the actual layout change. -
Page 13: Zoom In/Zoom Out
IP99 series Diagram 2.5 Layout selection 2.4 Zoom in/zoom out 2.4.1 Integer zoom in/zoom out Click buttons at top right side of the page to zoom in or zoom out the entire screen. 2.3.2 Single display zoom in/zoom out To zoom in/zoom out single channel screen, direct the mouse to at top of that channel display, and click on , slide the tilt wheel of mouse to zoom in or... -
Page 14: Stop Recording
2.4.2 Stop recording Method 1: Click on button located at top right corner of the image, it will stop recording immediately, button changes to Method 2：Double click on the green area of original color meaning that recording is stopped. 2.4.3 Snapshot Click button to snapshot the image，default file path for the snapshot is：... -
Page 15: Ptz Control Panel (For Video Server Only)
Click “Search NVR＂button to search the NVR device used for archiving recording files. If you do not have NVR device, please ignore this selection. Open the file to be played, click “Play＂to play recorded video. Click fast forward button Click fast reverse button Click pause button Click play button Note: If you have problem when use windows vista, please refer to 4.Frequesntly ask... -
Page 16: System Setting
Note 2：PTZ control can also be preformed by using PC’s keyboard, please refer to section 5 of 2.4.7 for more details. Note3: PTZ control is functioning only if PTZ Function is set On in PTZ Setting, please refer to section 3.12. 2.4.6 On-Screen PTZ Control (for Video Server only) On Screen PTZ function is available when you connect PTZ to IP99 video server or use IP99 PTZ. - Page 17 2） Change source: Click“Change source＂to fill out information for the IP camera to be controlled, as shown in diagram 2.11: First row: Camera name Second row: IP address of camera to be connected Third row: User name Fourth row: Login password When you finish filling out, click on“Change＂button to enter video display with setting changed.
-
Page 18: System Setting
IP99 series 4）Sound ON：used to enable/disable sound transmission. 5）PTZ(for Video Server only)：Click “PTZ＂option which allows you to check keyboard keys of PC used to control speed dome, as shown in diagram 2.13: Diagram 2.13 PTZ contraol keys and functions 6）File .av to AVI：Click“File .av to AVI＂option, select .av file to be converted and click “Confirm”... -
Page 19: Video/Audio Setting
IP99 series Diagram 3.1 status information 3.2 Video/audio setting Select 2. Video & Audio from the drop-down menu at top right corner, as shown in diagram 3.2: Diagram 3.2 Video & Audio settings Enable settings for video stream, snapshot, OSD, Record and Audio. 1）CBR setting: Set CBR enabled or disabled, default value is Disable. -
Page 20: Device Setting
2）Resolution: Set record resolution D1: 720x480 (NTSC) / 720x576 (PAL) Half D1: 720x240 (NTSC) / 720x288 (PAL) CIF: 352x240 (NTSC) / 352x288 (PAL) QCIF: 176x120 (NTSC) / 176x144 (PAL) 3）Limit frame rate to: Set frame rate according o resolution. 4）OSD setting: Set OSD text and font size. 5）Record: Set REC File path, REC file Duration Time and REC Disk Overwrite at. -
Page 21: Alarm Event
IP99 series Diagram 3.3（b）Device setting Diagram 3.3（b）shows the functions of IP camera, it is for IP camera NOT for Video Server. It has some additional functions compared to other cameras, as shown in diagram 3.3 (c): Diagram 3.3（c）Extension functions of device setting Mirror: Enable or Disable Mirror function by selecting ON/OFF. - Page 22 IP99 series selected area, click “Remove region”. Please refer to diagram 3.4: Diagram 3.4 Alarm event 1）Motion detection event: No event, send JPEG file by e-mail or upload to FTP. Note: When sending JPEG by e-mail or upload to FTP, file will be sent to the assigned e-mail adress.
-
Page 23: Networking
IP99 series 3.5 Networking Set camera’s IP address, DNS setting, HTTP port information, as shown in diagram 3.6: Diagaram 3.6 Networking DHCP will automatically get the IP address. If you are not using DHCP, you can manually assign IP address and port. Primary DNS server has to be the same as HTTP port set in IP address. -
Page 24: Wireless Lan
IP99 series 3.6 Wireless LAN Assignment will be made according to local wireless router, as shown in diagram 3.7: Diagram 3.7 Wireless settings 3.7 PPPOE setting Select whether to enable PPPoE function. If PPPoE function is enabled, please enter user name and password: Diagram 3.8 PPPOE setting... -
Page 25: Ddns Setting
IP99 series When network is connected, it will show IP address, default router and DNS server after connection in status section. Enable“Email notification when IP is changed＂function, so when the system re-connects to network, it will automatically notify the IP address to user by e-mail. 3.8 DDNS setting Dynamic DNS setting as shown in diagram 3.9: Diagram 3.9 DDNS setting... -
Page 26: Ftp Setting
IP99 series Diagram 3.10 SMTP setting Enter user name and password of login mail server. Once SMTP is set, it can be used when snapshot, alarm and PPPoE are enabled. 3.10 FTP setting Select “FTP server setting＂page, as shown in diagram 3.11： Diagram 3.11 FTP setting... -
Page 27: Date & Time Setting
IP99 series Set FTP server, user name, password, FTP command port and path & file name. User can upload recorded video and event file to FTP server. 3.11 Date & Time setting Set camera’s current date, time and time zone, as shown in diagram 3.12: Dirgram 3.12 Date &... -
Page 28: Administrator
Since IP address is the only fixed one, therefore PTZ address is set as “1”. Protocols are Pelco-D and Pelco-P which are in common use. Note: When using Everfocus speed dome, user only needs to set the protocol as AUTO in order to control the speed dome. -
Page 29: Change Password
IP99 series Diagram 3.14 Management 3.14 Change password Change user’s login password, as shown in diagram 3.15: Diagram 3.15 change password 3.15 Special setting Set compression, set camera type and transform to AVI format, as shown in diagram 3.16:... -
Page 30: Maintenance
Maintenance and system upgrade, as shown in diagram 3.17: Diagram 3.17 Maintenance server and Upgrade server Note: Please only use *.img file provided by Everfocus to upgrade firmware. Everfocus will not be responsible for any damage or loss caused by usage of firmware provided by the third party. -
Page 31: Frequently Asked Questions
4. Frequently Asked Questions 4.1 I have problem recording and playback on Windows Vista. Answer: You need to turn off User Account Control (UAC) 1. Open Control Panel. 2. Under User Account and Family settings click on the "Add or remove user account". - Page 32 415 Oser Avenue Unit S Hauppauge, NY 11788 Tel: 631-436-5070 : 631-436-5027 www.everfocus.com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.