Introduction Dp2K-Slp Series Mains Input - Barco DP2K SLP Series Service Manual

Mains Input

4.1 Introduction DP2K-SLP Series Mains Input

Introduction
The Mains Input consist in a terminal block, an ON/OFF switch, a mains input filter and a solid state relay. The
Mains Input compartment is located at the rear right side of the projector.
The purpose of the solid state relay is to switch off the Light Source when the projector is in Sleep mode.
Component identification Mains Input
2
3
4
Image 4-1
1 ON/OFF switch.
2 Solid state relay.
3 Mains filter.
4 Terminal block.
32 R5906848 /04 DP2K SLP Series
1