Initial Setup; Cell Phone Crank Charging; Aa Battery Operation; Turning The Radio On And Off - Eton FR350 Operation Manual

Am/fm/shortwave radio
Hide thumbs Also See for FR350:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
FR350_manual_apr14.qrk

INITIAL SETUP

1. Open the battery compartment; it slides downward with firm
pressure at center of hinge.
2. Connect the battery pack.
POWER SOURCES
1. Rechargeable battery pack (included).
2. 3 AA batteries (not included).
3. AC adapter/charger (included).
4. Continually turning the crank, even with no batteries installed.
CHARGING THE BATTERY PACK
1. Switch the power selector to the OFF position.
2. Turn the dynamo-crank clockwise or counter-clockwise about 2
turns per second.
3. After charging, select the DYNAMO/ADAPTOR position for power.
While charging, the red LED charging light illuminates.

AA BATTERY OPERATION

1. Open the battery compartment.
2. Install 3 AA batteries, observing polarity diagram.
3. For power, set the power selector switch to the BATTERY position.
4
3/17/06
2:54 PM
Page 6
USING AN AC ADAPTER
1. Flip open the socket cover and plug the adapter into the DC 4.5 V socket.
2. For power, set the power selector switch to the DYNAMO/
ADAPTER position.
EMERGENCY OPERATION WITH NO POWER SOURCE
1. Set power selector switch to DYNAMO/ADAPATOR.
2. While continually turning the dynamo crank, radio stations can
be tuned and the lights and siren function.

CELL PHONE CRANK CHARGING

Because cell phone batteries vary in their current ratings, we cannot
specify charging rates or usage time. 10 to 15 minutes of cranking
may result in 1 or more minutes of talk-time.
1. Set power selector switch to OFF position.
2. Flip open the socket cover and plug the cell phone charging cord
into the Phone Charge socket.
3. Select the correct charging tip for your phone.
4. Plug charging tip into the charging cord and into the phone's
charging socket.
5. Rotate the dynamo crank.

TURNING THE RADIO ON AND OFF

Turn it on with the POWER switch.
1. Select the BATTERY position when using AA batteries.
2. Select the DYNAMO/ADAPTER position when powering via the
AC adapter or internal, rechargeable Ni-MH battery pack.
3. To turn off, set power selector switch to OFF.
FR350
OPERATION MANUAL
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl48

Table of Contents