Table of Contents
Advertisement
If you have multiple IPv6 interfaces on your management station, use the
IPv6 global address instead of the IPv6 link local address to access the
device from your browser.
Launching the Configuration Utility
To open the web-based configuration utility:
1.
Open a Web browser.
2.
Enter the IP address of the device you are configuring in the address bar
on the browser (factory default IP address is 192.168.2.1) and then press
Enter.
3.
The default username is "admin" and the default password is "1234".
4.
The first time that you log in with the default username and password,
you are required to enter a new User name and Password.
Click the "Confirm" button to continue.
9
Advertisement
Table of Contents
