Installing And Updating Software, Drivers, And Firmware - Lexmark MB2236 User Manual

Set up, install, and configure
2
Adjust the guide to match the size of the paper that you are loading.
3
Load a sheet of paper with the printable side faceup.
•
Load letterhead with the printable side faceup and the top edge entering the printer first for one‑sided
printing.
•
Load letterhead with the printable side facedown and the top edge entering the printer last for two‑sided
printing.
•
Load envelope with the flap side down and against the left side of the paper guide.
Warning—Potential Damage: To avoid paper jams, do not force paper into the manual feeder.
Installing and updating software, drivers, and firmware
Installing the printer software
Notes:
•
The print driver is included in the software installer package.
•
For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to print
on an AirPrint-certified printer. If you want custom printing features, then download the print driver.
1
Obtain a copy of the software installer package.
•
From the software CD that came with your printer.
•
Go to www.lexmark.com/downloads.
2
Run the installer, and then follow the instructions on the computer screen.
Adding printers to a computer
Before you begin, do one of the following:
•
Connect the printer and the computer to the same network. For more information on connecting the printer
to a network, see "Connecting the printer to a Wi‑Fi network" on page
•
Connect the computer to the printer. For more information, see
page 50.
•
Connect the printer to the computer using a USB cable. For more information, see
page 22.
Note: The USB cable is sold separately.
47.
"Connecting a computer to the printer" on
"Attaching cables" on
44