Gps Settings For Phoenix; Gps Self Tests - Nokia RM-779 Service Manual

RM-779
BB Troubleshooting and Manual Tuning Guide

GPS settings for Phoenix

GPS Self Tests

Prerequisites
The GPS tests runnable from the ME Test tab of the Testing → GPS Control window can be
Note:
run in parallel by selecting more than one test from the Tests list.
A flash adapter (or a phone data cable) connected to a PC with Phoenix service software is required.
Steps
1. Place the phone in the flash adapter or connect a data cable to the phone.
Phoenix service software.
2. Start
Bus Method (FBUS or USB) and Port from the Connections box.
3. Select the
4. Choose File → Scan Product.
5. From the Operating Mode drop-down menu, set to Local.
6. Choose Testing → Self Tests.
Self Tests window, check the following GPS test set:
7. In the
• ST_GPS_TEST
8. To run the test, click Start.
Self Tests: Basic functionality of GPS ASIC and I2C, HOST_REQ, and RESET_ENA pin connections.
Issue 1
Figure 16 GPS layout and basic test points
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Page 3 – 59