Nokia RM-779 Service Manual page 37

RM-779
Service Tools and Service Concepts
Issue 1
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
SB-6
The SB-6 test box is a generic service device used to perform Bluetooth
bit error rate (BER) testing, and establishing cordless FBUS connection
via Bluetooth. An ACP-8x charger is needed for BER testing and an
AXS-4 cable in case of cordless interface usage testing .
Sales package includes:
• SB-6 test box
• Installation and warranty information
SB-7
WLAN test requires defined position for the device.
Place the phone on coordinates "E-1" for testing.
SRT-6
SRT-6 is used to open phone covers.
Note: The SRT-6 is included in the Nokia Standard Toolkit.
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Soldering jig
Bluetooth test and
interface box (sales
package)
WLAN test box
Opening tool
Page 2 – 9