Smeg SFP4390X Manual page 33

5. Two minutes after the pyrolytic cycle has
started the door is locked (the door lock
indicator light
that prevents the door from being
opened.
It is not possible to select any
function once the door lock device
has been activated.
6. At the end of the pyrolytic cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels. Wait for the oven to cool
down and collect the residues deposited
inside with a damp microfibre cloth.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
Cleaning and maintenance
comes on) by a device
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
7. After selecting the pyrolytic cycle
duration, press the temperature knob.
The display shows the current time and
the indicator light comes on.
8. Turn the temperature knob to set the time
at which you wish to complete the
pyrolytic cycle.
9. After a few seconds, the
indicator lights remain lit steadily and the
appliance waits for the set start time to
begin the cleaning cycle.
It is not possible to select any
function once the door lock device
has been activated.
and
73