Table of Contents
Advertisement
1�2
Getting started
1�2�1
Set up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Power off your
phone before inserting or removing the SIM card.
SIM1
SIM1
SIM1
Place the SIM card with the chip facing downwards and slide it into
SIM2
its housing. Make sure that it is correctly inserted. To remove the
card, press and slide it out.
SIM2
SIM2
(1)
For dual SIM models, both SIM1 and SIM2 support 4G
networks. If both of them are 4G SIM cards, only one card
can support 4G network
micro-SIM card. Do not attempt to insert other SIM types
like mini and nano cards, otherwise you may damage your
phone.
5070D only.
(1)
. Your phone only supports
(1)
5
Installing or removing the battery
Power off your phone before removing the battery.
•
Insert and click the battery into place, then close the cover.
•
Unclip the cover, then remove the battery.
Installing or removing the microSD card
To install, insert the microSD card first, and then place it into the slot
with the gold contact facing down. To remove the external microSD
card, slide and take it out from the slot.
Charging the battery
Connect battery charger to your phone and plug into the socket.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth
or background-running applications when not in use; reduce
the backlight time, etc.
6
Advertisement
Table of Contents
