Advertisement
Commissioning information
S4 Mains powered interface
(S4-34440-02 & S4-34440-12)
DIN rail modules
11+
12-
Hazardous
area
Safe
area
1+
2-
IS Galvanic Isolator
for
detectors
(
Part number: 17740-20)
Pepperl+Fuchs
KFDO-CS-Ex1.51P
24 22 12 14
6
5
4
3
A2
7
8
1
2
24Vdc
A2 21 11 A1
Relay (Part number: 19104-52)
4188-968 issue 2_Part 2_09-10_S4 mains interface
www.acornfiresecurity.com
Factory settings
¨
The S4 Mains powered interface channels 1 - 4 are all set to
UNUSED.
¨
The Auxiliary output is off and is unaffected by mains failure or
fire reset.
Compatibility
The S4 Mains powered interface unit is compatible for use in
Vigilon and Nano systems having the following panel firmware.
Control Panel having card and firmware
Vigilon
Nano
Note a Nano loop can only accomodate S4-34440-12.
Backward Compatibility (for Vigilon loop)
An S4 Mains powered interface unit can be converted to be a
BACKWARD COMPATIBLE 34440 Mains powered interface unit
for use on a Vigilon loop. The conversion is done using a
S4 Interface programmer unit. For further information contact your
supplier.
Mains Powered Interface
Hazardous
1
area
2
-
-
Safe
11
area
12
IS Galvanic Isolator
for
sounders
(
Part number: 02518-10)
MTL5021
24 22
14
12
A1
21
11
Contacts rated at
10A / 250VAC
www.acornfiresecurity.com
Main Controller Card ³ V4.43 / V3.97
Loop Processor Card ³ V4.41 / V3.97
Vigilon Commissioning tool ³ V1.27
Main Controller ³ V2.50
Nano Commissioning tool ³ V2.x
DIN Rail
Metal Screen
by Honeywell
Relay
1
Advertisement
