Advertisement
Commissioning information
Confirmation Output mode
A channel is configured as a confirmation output and is associated with an input at another channel, but not
its own channel.
Mode
Confirmation Output
Output with Zone Input mode
This is when a channel is configured as an output and the channels input terminals are Zone Input.
Mode
settings
Output / Zone input
Zone input type
Output type
Sync. pulse
Failsafe
Mains failure
Validation delay
Reset period
Output normally
8
www.acornfiresecurity.com
settings
Output type:
Fail safe
Mains Failure
Associated Input
Output Normally
www.acornfiresecurity.com
S4 Mains powered interface unit
notes
See page 4.
See page 4.
See page 4.
The selected input channel is associated with the
confirmation output channel. Note channel 1 cannot be
selected for associated input as it is already being used
as an output.
See page 4.
notes
See page 5.
See page 4.
See page 4.
See page 4.
See page 4.
See page 5.
See page 5.
See page 4.
4188-968 issue 2_Part 2_09-10_S4 mains interface
Advertisement
