Power Management Screen Options - Dell Latitude 7280 Owner's Manual

Option Description
Default setting: The option is enabled.
C-States Control Allows you to enable or disable the additional processor sleep states.
● C states
Default setting: The option is enabled.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
● Enable Intel TurboBoost
Default setting: The option is enabled.
HyperThread Allows you to enable or disable the Hyper-Threading in the processor.
Control
● Disabled
● Enabled
Default setting: Enabled is selected.

Power management screen options

Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
● Enable USB Wake Support
● Wake on Dell USB-C dock
Default setting: The option is disabled.
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.
Advanced This option enables you to maximize the battery health. By enabling this option, your system uses the
Battery Charge standard charging algorithm and other techniques, during the nonwork hours to improve the battery
Configuration health.
Disabled
Default setting: Disabled
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
System Setup 63