Power Management Screen Options - Dell Latitude 7490 Owner's Manual

Option Description
Default setting: The option is enabled.
C-States Control Allows you to enable or disable the additional processor sleep states.
● C states
Default setting: The option is enabled.
Allows you to enable or disable the Intel TurboBoost mode of the processor.
Intel TurboBoost
● Enable Intel TurboBoost
Default setting: The option is enabled.
Allows you to enable or disable the Hyper-Threading in the processor.
HyperThread
● Disabled
Control
● Enabled
Default setting: Enabled is selected.

Power management screen options

Option Description
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
AC Behavior
connected.
Default setting: Wake on AC is not selected.
This option is used to enable or disable Intel speed shift technoloy.
Enable Intel
Speed Shift
Default setting: Enable Intel Speed Shift Technology is enabled.
Technology
Allows you to set the time at which the computer must turn on automatically. The options are:
Auto On Time
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
Allows you to enable USB devices to wake the system from Standby.
USB Wake
Support
● Enable USB Wake Support
● Wake on Dell USB-C dock
Default setting: The option is disabled.
Allows you to enable or disable the feature that automatically switches from wired or wireless networks
Wireless Radio
without depending on the physical connection.
Control
● Control WLAN Radio
● Control WWAN Radio
Default setting: The options are disabled.
Allows you to enable or disable the feature that powers on the computer from the Off state when
Wake on WLAN
triggered by a LAN signal.
● Disabled
● LAN Only
● WLAN Only
● LAN or WLAN
This feature is only functional when the AC power adapter is connected. If the AC power
NOTE:
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
System setup 71