Dell Latitude 7280 Owner's Manual page 30

Hide thumbs Also See for Latitude 7280:
Table of Contents

Advertisement

a. Un route the WLAN and WWAN cables from the routing channels [1].
b. Remove the M2.0 x 5.0 screws that secure the eDP bracket [2].
c. Lift the eDP bracket from the eDP cable [3].
d. Lift the eDP cable to disconnect it from the connector on the system board [4].
e. Un route the eDP cable from the routing channel [5].
7. To remove the display assembly:
a. Open the display of the computer and lay it on a flat surface at an 180-degree angle.
b. Remove the M2.5 x 4.0 screws that secure the display hinge to the display assembly [1].
c. Lift the display assembly from the computer.
30
Disassembly and reassembly

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P28s

Table of Contents