Back Panel Connectors - Gigabyte GA-F2A88XM-D3HP User Manual

1-7

Back Panel Connectors

USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
D-Sub Port
The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200
(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports
D-Sub connection to this port.
DVI-D Port
(Note 1)
The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 2560x1600.
Connect a monitor that supports DVI-D connection to this port. Please note that the actual resolutions
supported are dependent on the monitor being used and support for 2560x1600 resolution requires both
a monitor and cable that support Dual Link DVI.
USB 3.1 Type A Port (Red)
The USB 3.1 port supports the USB 3.1 specification and is compatible to the USB 3.0/ 2.0/1.1 specification.
Use this port for USB devices.
USB Type-C Port
™
The reversible USB port supports the USB 3.1 specification and is compatible to the USB 3.0/2.0
specification. Use this port for USB devices.
HDMI Port
output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution
is 4096x2160 , but the actual resolutions supported are dependent on the monitor being used.
(Note 2)
After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The
item name may differ depending on your operating system.)
Hardware Installation
The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio
In Windows 8.1, select Start>Control Panel>Hardware and
Sound>Sound>Playback, set AMD High Definition Audio
Device to the default playback device.
(Note 1) The DVI-D port does not support D-Sub connection
(Note 2) The resolution of 4096x2160 can be supported
- 20 -
by adapter.
when using an FM2+ APU; the maximum resolution
supported is 1920x1200 when using an FM2 APU.