Gigabyte GA-F2A88XM-D3HP User Manual page 58

C-2. Configuring Legacy RAID ROM
Enter the legacy RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation
of Windows operating system for a non-RAID configuration.
Steps:
After the POST memory test begins and before the operating system boot begins, look for a message which
looks like that in Figure 8 below. Press <Ctrl> + <R> to enter the RAID BIOS setup utility.
AMD-RAID Controller BIOS (6.1.4-00059)
(c) 2012-2013 Advanced Micro Devices, Inc.
Press <CTRL-R> to Configure.
* BIOS defaults restored. *
1--Legacy, 79GB, Normal (NA)
2--Legacy, 79GB, Normal (NA)
Creating a RAID Array
To create a new array, press <Enter> on the Create Array option. (Figure 9)
Creates an array from the connected disks
Arrays
Main Menu
Initialize Disk(s)
Create Array
Delete Array(s)
Swap Two Arrays
Manage Hot Spare(s)
View Disk Details
View Array Details
Rescan All Channels
Controller Options
Continue to Boot
License Level: 50
Configuring a RAID Set
Figure 8
AMD-RAID Array Configuration (Build: 6.1.4-00059)
0-00, 79GB, Ready
1-01, 79GB, Ready
<h><i><f><g>=Choose, <Esc>=Back
<Enter>=Select Menu Item
Figure 9
- 58 -
Disks
Available Keys
Available Keys