Sovereign XSS40B Original Instruction Manual
  1. Manuals
  2. Brands
  3. Sovereign Manuals
  4. Lawn Mower
  5. XSS40B
  6. Original instruction manual

Sovereign XSS40B Original Instruction Manual

40cm hand push petrol lawnmower
Hide thumbs
Table of Contents

Advertisement

Quick Links

40CM HAND PUSH
PETROL LAWNMOWER
Item No. 577180
Model No. XSS40B
ORIGINAL INSTRUCTION MANUAL
Please read these instructions fully before starting assembly.
HHGL Limited, MK9 1BA. HHGL (ROI) Limited, D02 X576
Technical Support & Parts
01904 727509
Mon-Fri 9am-5pm Sat-Sun 11am-4pm
www.coreservice.co.uk
Oct. 20

Advertisement

Table of Contents
loading

Related Manuals for Sovereign XSS40B

Summary of Contents for Sovereign XSS40B

  • Page 1 40CM HAND PUSH PETROL LAWNMOWER Item No. 577180 Model No. XSS40B Technical Support & Parts 01904 727509 Mon-Fri 9am-5pm Sat-Sun 11am-4pm www.coreservice.co.uk ORIGINAL INSTRUCTION MANUAL Please read these instructions fully before starting assembly. HHGL Limited, MK9 1BA. HHGL (ROI) Limited, D02 X576...

  • Page 2: Table Of Contents

    CONTENTS General safety warning Intended use Warnings symbols In the box Preparing to assemble the lawnmower Preparing to operate the lawnmower Operating the lawnmower Maintenance Troubleshooting Technical data Disposal Getting help Warranty...

  • Page 3: General Safety Warning

    GENERAL SAFETY WARNINGS SAFETY WARNINGS WARNING! Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in fire and/or serious injury. WARNING! Read all safety warnings and instructions designated by the symbol. Save all warnings and instructions for future reference.
  • Page 4 GENERAL SAFETY • Keep this operating and maintenance manual in a safe place for reference at a later date. • Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. • Never allow children or people unfamiliar with these instructions to use the lawnmower.
  • Page 5 • Petrol is highly flammable; store fuel in containers specifically designed for this purpose. A. Refuel outdoors only, and do not smoke while refuelling. B. Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running, or when the engine is hot.
  • Page 6 • Walk, never run. • Mow across the face of slopes, never up and down. • Exercise extreme caution when changing direction on slopes. • Do not mow excessively steep slopes. • Use extreme caution when reversing or pulling the lawnmower towards you. •...
  • Page 7 • Never pick up or carry a lawnmower while the engine is running. • Stop the engine and disconnect the spark plug cable, making sure that all moving parts have come to a complete stop. a) Before clearing blockages or unclogging the chute.

  • Page 8: Intended Use

    Check the grass bag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors. INTENDED USE This mower is designed for domestic lawn mowing only. Use in any other way is considered contrary to the intended use.
  • Page 9 No naked flames. Appropriate ear, eye, and head protection (PPE) must be worn. Hot surfaces will burn fingers or palms. Warning! The lawnmower exhaust gas contains toxic substances. Do not run the engine in closed or poorly ventilated areas. Blade continues to rotate for a period after the machine is switched off.

  • Page 10: In The Box

    IN THE BOX PARTS 1. Upper handle with soft grip 2. Start/Stop bar 3. Handle fixing knob & square neck bolts x 2 4. Grass collection bag 5. Lower handle 6. Height adjustment handle 7. Wheel 8. Engine 9. Deck 10.

  • Page 12: Preparing To Assemble The Lawnmower

    PREPARING TO ASSEMBLE THE LAWNMOWER WARNING! Always take care when removing the packaging, to prevent damage to you or to the lawnmower. This item requires a two-person lift to remove it from the packaging. Make sure that you have sufficient space to put the lawnmower down.
  • Page 13 STEP 2 - ASSEMBLE THE UPPER HANDLE Lift the upper handle, and lock in place using the handle tension knob and nuts. Make sure that you attach the rope guide between the handle and tension knob. Ensure the lower and upper handles are firmly connected. When you stand behind the mower, ensure the rope guide is on the right handle.
  • Page 14 STEP 3 - ASSEMBLE THE GRASS BAG 3a. Firstly, attach the grass bag to the frame by fixing all plastic hooks. 3b. Raise the safety flap, and hook the collection bag onto the mower. Release the safety flap. STEP 4 - ATTACH THE CABLE CLIP Ensure that the cable clips supplied are used to fix the cable to the lower handle.

  • Page 15: Preparing To Operate The Lawnmower

    PREPARING TO OPERATE THE LAWNMOWER STEP 1 - FILLING WITH ENGINE OIL IMPORTANT The following procedures and adjustments must be performed before the engine is started. Do not attempt to make any of these adjustments while the engine is running. Always use high-quality detergent oil classified SAE 30 oil (or equivalent, e.g.
  • Page 16 There should be no fuel in the filler neck. 4. Clean up any overflow or splashes of petrol before starting the engine. 5. Tighten the filler cap after filling, finger tight only. NOTE! The Sovereign 40cm Hand Push Lawnmower has a maximum fuel capacity of 800ml.

  • Page 17: Operating The Lawnmower

    OPERATING THE LAWNMOWER STEP 1 - SETTING THE CUTTING HEIGHT WARNING! The blade can cause serious injury. Before adjusting the mower height, stop the engine and wait for the mower blade to stop completely. 1. Pull the lever towards the wheel, then move it forward or backward to adjust the cutting height.
  • Page 18 STEP 2 - STARTING THE ENGINE WARNING! Do not operate the machine in enclosed or poorly ventilated areas as the exhaust gas contains toxic substances. Keep hands, feet, hair and clothing away from all the moving parts of the machine. The exhaust and other parts of the machine will become hot during use.
  • Page 19 Pressing the primer button too many times could cause the engine to flood. NOTE! When starting a warm engine, the primer does not need to be used. If the engine stops due to a lack of petrol, refill and press down the primer 3-5 times. 1-2 Start/Stop bar activation Pull the Start/Stop bar towards you.
  • Page 20 Install the spark plug carefully by hand, to avoid cross- threading. After the plug is seated, tighten 1/8 to 1/4 turns with socket spanner of spark plug to compress the washer. C. Pull the stop/start bar towards the upper handle. D.

  • Page 21: Maintenance

    STEP 5 - EMPTYING THE GRASS BAG Raise the discharge flap with one hand and remove the grass bag using its handle with your other hand. To maintain safety, the discharge flap will close back to cover the mulching plug when you release the flap.
  • Page 22 STORING THE LAWNMOWER FOR EXTENDED PERIODS CAUTION! Do not empty the petrol tank in enclosed areas, near fire or when smoking. Petrol fumes can cause explosions and fire. If the lawnmower is to be placed into storage at the end of the season, or if the mower is not to be used for a longer period than 6 weeks, storage maintenance must be performed on the lawnmower.
  • Page 23 PREPARATION TO RE-USE Check the oil level before starting the engine and ensure there is sufficient oil, see page 7. Check the spark plug is inserted correctly, see page 25. Fill engine with fresh unleaded fuel, see page 16. Follow starting procedure, see page 18. MAINTENANCE SCHEDULE WARNING! - Before you tip the lawn mower onto its side, completely...
  • Page 24 CLEANING To ensure long life and good performance of the machine, it’s important to keep the machine clean and well lubricated. Make sure the chute is clean and under the deck is cleared from wet debris. (See also short term storage). - Do not allow grass cuttings and other debris to become dry and hard on any of the mower surfaces.
  • Page 25 CLEANING OR REPLACING THE SPARK PLUG 0.7-0.8 mm 2a Once the engine has cooled, pull off the spark plug boot with a twist. Remove the spark plug using the socket spanner supplied. 2b Clean the plug with a wire brush. 2c Using a feeler gauge, set the gap to 0.7mm.
  • Page 26 REPLACING THE CUTTING BLADE WARNING! USE GLOVES. - Before you remove the grass collection bag, stop the engine and wait until the blade stops completely. - You will need garden gloves (not provided) and a spanner wrench to remove the blade. - Always handle the blade with care - sharp edges could cause injury.
  • Page 27 1. Tip the machine slightly towards the oil filler pipe and reach under the deck. 2. Hold the blade and unscrew the blade bolt counterclockwise using a spanner wrench. Remove the washer and the blade. 3. Inspect the blade adaptor for any signs of damage. 4.

  • Page 28: Troubleshooting

    TROUBLESHOOTING WARNING! - Always switch off the engine and pull the ignition cable before starting any inspection or adjustment work. - If after making an adjustment or repair to the engine you let it run for a few minutes, remember that the exhaust and other parts will get hot.

  • Page 29: Technical Data

    TECHNICAL DATA Property Value Model No. XSS40B Engine type Single cylinder 4-stroke Engine displacement 127.1cm Max. engine power 2kW / 3600 rpm Max. operation engine speed 2900/min Cutting height 25~75mm/ 5 positions Cutting width 40cm Grass bag capacity Ignition T.C.I Fuel tank capacity 0.8L...

  • Page 30: Disposal

    DISPOSAL The lawnmower and its accessories are made of various recyclable materials. Dispose of the lawnmower in accordance with your local recycling regulations. GETTING HELP Our dedicated UK-based customer helpline is open 7 days a week to assist you with assembly, parts queries and technical support.

  • Page 31: Warranty

    WARRANTY This product is covered by a 1 year warranty. The warranty covers any manufacturing defect in materials, workmanship and finish. Any claim under this warranty must be made by going to your nearest Homebase store, taking your proof of purchase with you, and claims must be made within 1 year of the date of purchase.

This manual is also suitable for:

577180

Table of Contents