Aiwa XR-X7 Operating Instructions Manual page 14

PTY search
The unit can search for a station broadcasting your desired PTY
easily. To do so, you need to preset every available station in
En
advance since the unit searches only the preset stations.
1 Press DEMO/ECO/RDS repeatedly until the
program type of the currently tuned station is
displayed.
2 Press f or g to select a program type.
If f or g is not pressed within 10 seconds, the
PTY search will be cancelled.
3 Press c.
If c is not pressed within 10 seconds, the PTY search
will be cancelled.
"NOT FOUND" is displayed if a suitable station is not
found, and the unit returns to the previous station.
If there is no button input for 4 seconds in step 2, the
search is not activated.
Tip:
If TRAFFIC is selected , the unit searches for a station which
regularly broadcasts traffic announcements. Therefore, a
detected station may not be currently broadcasting traffic
announcements. You will, however, be able to hear the
announcements in a while.
14
EON search
The unit can leap to a station which has just started broadcasting
your desired PTY.
In EON (Enhanced Other Networks information) search, the
unit is in standby mode until the desired PTY begins. As soon
as it begins, the unit "leaps to" another station with the PTY
and returns to the previously tuned station when it ends. EON
search makes the function above possible with the help of EON
which gives the receivers a cross reference to other stations.
You need to preset every available station in advance since the
unit searches only the preset stations.
1 Press DEMO/ECO/RDS repeatedly until the
program type of the currently tuned station is
displayed.
2 Press f or g to select a program type.
If f or g is not pressed within 10 seconds, the
PTY search will be cancelled.
3 Press a.
If a is not pressed within 10 seconds, the PTY search
will be cancelled.
"EON ON" is displayed for 3 seconds and then the unit
enters the standby mode while "EON" flashes. When the
unit leaps to another station, "EON" flashes rapidly.
If there is no button input for 4 seconds in step 3, the
search is not activated.
To return to the previously tuned station from the
"leaped to" station
Press s. The standby mode for EON search is also cancelled.
To cancel the standby mode for EON search
Press DEMO/ECO/RDS repeatedly so that the program type
display appears. Press s and then press a.
•The standby mode for EON search will not be cancelled even
if the unit is turned off.
Note on PTY & EON Search
PTY & EON search do not function under the
following conditions:
- FM stations are not preset.
- The signals of the station broadcasting the desired PTY are
weak.
- FM RDS stations cannot be received.
Clock-Time (CT)
You can automatically set and update the clock on the hour
every hour just by tuning in an RDS station since RDS stations
transmit clock signals.
1 Press DEMO/ECO/RDS repeatedly to select
"CT ON" while the unit is on and the time is
displayed (see "Setting the clock").
2 Tune in an RDS station.
To deactivate CT function (If the clock is set wrongly
due to an incorrect clock signal)
An RDS signal will update the clock time on the hour every
hour.
Note on RDS features
The RDS features described above may not function correctly
if the RDS transmission data from the station contains too
much interference or the reception signal is too weak.