User Settings - Daikin Altherma 3 H MT ECH2O Installer's Reference Manual

10 | Configuration

10.5.7 User settings

Language
Installer reference guide
194
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
Example: setpoint (T )≤maximum heat pump temperature–[6‑01] (T
U
T
DHW
T
50
HP MAX
T =T
45
U HP OFF
T
43
HP ON
40
30
20
HP
10
5
HP Heat pump. If heating up time by the heat pump takes too long, auxiliary heating by
the backup heater can take place
T Maximum heat pump temperature at sensor in storage tank
HP MAX
T Heat pump OFF temperature (T
HP OFF
T Heat pump ON temperature (T
HP ON
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
INFORMATION
The maximum heat pump temperature depends on the ambient temperature. For
more information, see the operation range.
WD curve
When weather dependent operation is active the desired tank temperature is
determined automatically depending on the averaged outdoor temperature: low
outdoor temperatures will result in higher desired tank temperatures as the cold
water tap is colder and vice versa.
Also see "10.4 Weather-dependent
Overview
The following items are listed in the submenu:
7
Space heating/cooling
Tank

User settings

Information
Installer settings
# Code
[7.1] N/A
[6-00]
t
−[6-01])
HP MAX
−[6-00])
HP OFF
4
curve" [ 156].
[7] User settings
[7.1] Language
[7.2] Time/date
[7.3] Holiday
[7.4] Quiet
[7.5] Electricity price
[7.6] Gas price
Description
Language
–[6‑01])
HP MAX
EPRA08~12EAV3+W1 + ETSH/X(B)12P30+50EF
Daikin Altherma 3 H MT ECH₂O
4P663478-1 – 2021.07