Applications Are No Longer Displayed From The Computer Screen When The Multi-Screen Display Function Is Executed; The Mouse Cursor Is Not Displayed On The Computer Screen; When Connecting With Emp Ns Connection The Image Is Not Displayed Or The Image Is Slow To Appear - Epson PowerLite 825 Operation Manual

Troubleshooting
Applications are no longer displayed from the computer
screen when the multi-screen display function is executed.
Check
Is another application running on the virtual display?
For Windows

The mouse cursor is not displayed on the computer screen.

Check
Is EPSON Virtual Display installed?
For Windows
When connecting with EMP NS Connection the image is not
displayed or the image is slow to appear.
Check
Did you try to play back movies with Media Player or try to
operate the screen saver preview?
Is WEP encryption enabled, or are multiple projectors
connected?
Have you enabled DHCP?
Is Wireless LAN 802.11g/b being used in Quick Connection
Mode?
When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In
this case, set EPSON Virtual Display to "Off" at "Screen properties".
The mouse cursor was moved onto the virtual display. When the virtual display checkbox is cleared
on the Add-Remove EPSON Virtual Display screen, the mouse pointer returns to the screen display
area.
Depending on the computer, the movie playback screen in Media Player may not be displayed, and
the screen saver preview may not be displayed normally.
The display speed decreases when WEP encryption is effective or multiple projectors are connected.
When DHCP is set to On in Advanced Connection Mode or Wired LAN connection, if an available
DHCP server is not found, it takes time to enter LAN standby status.
If there is interference, there are times when the image and sound for movies may stop. Try using
Advanced Connection Mode or Wireless LAN 802.11a in Quick Connection Mode.
Remedy
Remedy
Remedy
62