Epson PowerLite 825 Operation Manual page 64

Troubleshooting
Error Messages
The selected projector is busy. Do you want to continue
the connection process?
EMP NS Connection initialization failed.
Connection failed due to keyword mismatch.
Network adapter information could not be obtained.
One or more connected projectors do not support
resolutions greater than SXGA. Reduce the screen
resolution and reconnect.
One or more projectors are not responding.
Enter the keyword displayed on the projector screen.
You tried to connect to a projector that is connected to another computer.
When the Yes button is clicked, it connects to the projector. The connection between the projector
and the other computer is cut off.
When the No button is clicked, it does not connect to the projector.
The connection between the projector and the other computer is maintained.
Restart EMP NS Connection. If the message still appears, uninstall and then reinstall EMP NS
Connection.
p.8
s
When connecting to a projector for which a Projector keyword has been set, the wrong Projector
keyword is entered.
Check the Projector keyword that is displayed on the projector's connection standby screen. After the
connection is cut off and then reconnected, enter the Projector keyword on the keyword entry screen
that is displayed.
p.14
s
Check the following point.
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see your User's Guide.
There is an ELP-735 projector in the connection destination. Change the computer screen resolution
to SXGA (1280x1024) or less.
You cannot connect to multiple projectors simultaneously. Check the network settings on the
computer and the network settings on the projector.
For details on the network settings to be made on the projector, see your User's Guide.
Check the Projector keyword displayed on the LAN standby screen, and enter the Projector keyword.
Remedy
64