Timing Belt (Threading) Replacement - Sony Betacam SX DNV-5 Maintenance Manual

3-3-4. Timing Belt (Threading) Replacement

3-3-4. Timing Belt (Threading) Replacement
Outline
Replacement
TC head assembly removal
Manual eject drive removal
VH cleaner assembly removal
Pulley gear (B) removal
Timing belt (threading) removal
Timing belt (threading) installation
Pulley gear (B) installation
VH cleaner assembly installation
Manual eject drive installation
TC head assembly installation
Adjustment after replacement
Operation confirmation
TC head position check
Preparations
1. Turn off the power.
2. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
n
Stop washers are used for installing each gear of the gear block assembly. Use a new
stop washer (3-559-408-11) when replacing each gear of the gear block assembly.
Tools
. Stop washer insertion tool
. Torque screwdriver bit (for M2)
. Torque screwdriver (for 3 kg)
3-46
J-6323-530-A
J-6325-380-A
J-6325-400-A
DNV-5
DNW-7/90/90WS