Bar Graph - Fluke III Series Instruction Sheet

70/73 English Instruction Sheet
Automatic Touch Hold
To avoid electric shock, do not use the Touch Hold
to determine if a circuit with high voltage is dead.
®
The Touch Hold mode will not capture unstable or
noisy readings.
®
The Touch Hold mode automatically captures and displays
stable readings. Press R for 2 seconds while turning the
meter on.
V DC
V
2 seconds
_
+
When the meter captures a new input, it beeps and a new
reading is displayed. To manually force a new measurement to
be held, press R.
Stray voltages can produce a new reading.
®
To exit the Touch Hold mode, turn the meter off.

Bar Graph

The bar graph shows readings relative to the full scale value of a
displayed measurement range and indicates polarity.
Mode
®
W Warning
H
V DC
V
_
+
single
beep
Note
Page 3
®
V DC
V
_
hr3f.eps
hr16f.eps