Advertisement
Quick Links
Polaris Ranger 1000 Roof Kit
POLARIS RANGER 900, XP 900, 1000
Available Options:
1. Door Kit (P/N: 1POLXP1000DR)
2. Windshield Kit (P/N: 1POLXP1000WS)
3. Rear Panel Kit (P/N: 1POLXP1000RP)
Approximate Installation Time *
Experienced Dealer Technician – 15 minutes
Average Dealer Technician – 20 minutes
Do-It-Yourself – 30 minutes
(*=Not including accessories)
Register your new product quickly online at
Curtiscab.com/product-registration/
Curtis encourages all customers to register their
Curtis products. However, failure to do so will not
diminish right to warranty. Curtis Industries does not
sell or share your information with anyone else.
The contents of this envelope are the property of the owner. Leave with the owner when installation is complete.
Kit p/n:1POLXP1000RF
Fits Tractor Models:
& XP 1000
4. Front Wiper Kit (P/N 1POLXP1000WK)
5. Side View Mirrors (P/N: 9PM5)
6. Door Restraint Kit (P/N: 1POLXP1000GS)
Approximate Product Specifications
Weight: 18 lbs.
Cab Width: 57.5 inches
Download a digital copy of your installation
instructions online at Curtiscab.com/literature/
Curtis strives to continuously improve our products,
technical documentation, etc. Therefore, the
installation manual for this product may have been
updated after your product was packaged. The
latest revision of the installation manual can always
be found at the website above.
1 of 6
Rev. A, 06/30/2021
p/n: IM-1POLXP1000RF
Advertisement
Related Manuals for Curtis Polaris Ranger 1000 Roof Kit
Summary of Contents for Curtis Polaris Ranger 1000 Roof Kit
- Page 1 Therefore, the Curtis encourages all customers to register their installation manual for this product may have been Curtis products. However, failure to do so will not updated after your product was packaged. The diminish right to warranty. Curtis Industries does not latest revision of the installation manual can always sell or share your information with anyone else.
-
Page 2: Table Of Contents
BOLT TORQUE SPECIFICATIONS ............. 5-6 WARNINGS, TIPS, & REQUIRED TOOLS Curtis cabs, kits, and accessories feature an assembly of parts designed for your vehicle which require adjustment and alignment of components to accommodate vehicle variations and provide proper weather protection. For accurate installation, proper operation, and years of satisfaction, please read and understand the installation and owner’s manual fully prior to installing the roof kit. -
Page 3: Kit Installation
3 of 6 KIT INSTALLATION STEP 1: (VEHICLE PREP) If installing multiple Curtis Polaris Ranger 1000 kits, install in the following order. 1.Doors 2.Windshield Cut foam to 3.Rear Panel radius of ROPS 4.Roof 1.1 Per figure 1.1, apply 1/2" X 9/16" foam rubber... -
Page 4: Care And Maintenance
Fig. 2.3 (Install front screws, washers & lock nuts) CARE AND MAINTENANCE • Check and tighten hardware after 40 hours of operation. Periodically inspect and tighten hardware for the remainder of the unit’s life. POLARIS RANGER 1000 ROOF KIT SERVICE PARTS RUBBER FOAM, 1/2" SIDE BULB 1/2"... -
Page 5: Bolt Torque Specifications
5 of 6 Torque Specs. for Structural Bolts This page is for use primarily when dealing with high-strength vehicle fasteners such as ROPS hardware that hold the structure together for safety. This page can also be used for other solid metal-to-metal joints. Do not use these high torque values on any of the following applications involving: tubing, plastic, nylon or rubber washers, threaded inserts, etc.. - Page 6 Tightening of Non-Structural Bolts For light or medium duty fastening, Curtis recommends using a general industry standard of tightening until snug and then giving an additional one quarter turn of the tool as deemed reasonable for the application (i.e.: at the installer’s discretion).