Utilize "Miu Live Viewer" - Basic - 3M X90w Manual

Hide thumbs Also See for X90w:

Table of Contents

3. How to use Projector software – Basics -

3.1.4 Utilize "MIU Live Viewer" – Basic -

This section explains basic of how to use "MIU Live Viewer" functions.

• Before start up the MIU Live Viewer, you have to set the projector into LIVE

MODE by either of following way.

1) from Web Remote Control

(1) Select LIVE MODE

2) from OSD Menu

(1) Set the port into MIU menu by remote control or Keypad.

(2) Open the OSD Menu by pressing ▲/◄/►/▼ Keypad button on the projector

or Menu button on remote control.

(3) Select the LIVE MODE in MIU Menu, and press the ► button on Keypad on

the projector or Enter button on remote control.

• After setting to the projector into LIVE MODE.

1) Start "MIU Live Viewer". If "MIU Live Viewer" installation is not completed,

install it referring to 3.1.1 Install "MIU Live Viewer".

Fig. 3.1.4.a Screen after "MIU Live Viewer" starting up

Table of Contents

X90/w