Page 1
X90w Multimedia Projector Network Functions This manual is only intended to explain Network Functions. WARNING NOTE this manual. permitted without express written consent. Trademark acknowledgment ”...
Do not pull out the memory card and the wireless card while the power is on. The • Premises radio stations communication. Country or Region Japan Taiwan CAUTION 1 to 11 1 to 11 1 to 11 1 to 11 1 to 11 Caution...
2. Equipment connection and network setting 2.2 Network connection using “One-Click-Communication” function (Continued) is pushed and real time display is started automatically. [Wireless LAN connection] automatically. 2.3 Manual network connection setting – Wired LAN - This section explains how to set up network connection manually. 2.3.1.
2. Equipment connection and network setting 2.3 Manual network connection setting – In case of wired LAN - (Continued) 2.3.3 “Internet Option” setting Click Click...
2. Equipment connection and network setting 2.3 Manual network connection setting – In case of wired LAN - (Continued) 2.3.4 Check connection (Projector IP address)
2. Equipment connection and network setting 2.4 Manual network connection setting – For wireless LAN 2.4.1 Preparation for wireless LAN connection access point to communicate. and USB memory of the Operator's Guide Inserting an SD card...
2. Equipment connection and network setting 2.4 Manual network connection setting – For wireless LAN (Continued) 2.4.2 Wireless LAN connection set up...
Page 18
2. Equipment connection and network setting 2.4 Manual network connection setting – For wireless LAN (Continued)
Page 19
2.4 Manual network connection setting – For wireless LAN (Continued) that is connected to the same network. NOTE Site..." to allow the window to open. 2. Equipment connection and network setting...
Page 20
2. Equipment connection and network setting Item Description Administrator ID User ID Network Information Network Settings Port Settings Mail Settings Alert Settings Schedule Settings Date/Time Settings Security Settings Remote Control Network Restart connection. passwords. Item Password Administrator ID User ID User...
Page 21
2. Equipment connection and network setting [http://192.168.1.10/] into the address [Logon].
2. Equipment connection and network setting 2.5.1 Network Information Item Description DHCP IP Address Default Gateway MAC Ethernet MAC Wireless Firmware Date Firmware Version...
2.5.2 Network Settings Item NETWORK MODE DHCP ON DHCP OFF IP Address Default Gateway DNS Server Address 2. Equipment connection and network setting Description Select Network mode "wired" or "wireless".
Page 24
2. Equipment connection and network setting 2.5.2 Network Settings (Continued) Item Wireless Mode channel) Speed Encryption WEP Key WPA Passphrase SSID [Apply] NOTE [Network Restart] on the main menu. Description NOTE Select communication speed. Select data encryption method.
2.5.3 Port Settings Item Network Control Port1 Port open Authentication Network Control Port2 Port open Authentication SNMP Port Port open Trap address SMTP Port Port open [Apply] NOTE [Network Restart] on the main menu. 2. Equipment connection and network setting Description...
2.5.5 Alert Settings Item Cover Error SNMP Trap Send Mail Mail Text Fan Error SNMP Trap Send Mail Mail Text 2. Equipment connection and network setting Description this item. item. characters. characters. this item. item. characters. characters.
Page 28
2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Item Lamp Error SNMP Trap Send Mail Mail Text Temp Error SNMP Trap Send Mail Mail Text Air Flow Error SNMP Trap Send Mail Mail Text Description this item. item. characters.
Page 29
2.5.5 Alert Settings (Continued) Item Lamp Time Error SNMP Trap Send Mail Mail Text Cool Error SNMP Trap Send Mail Mail Text Filter Error SNMP Trap Send Mail Mail Text 2. Equipment connection and network setting Description this item. item. characters.
Page 30
2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Item Other Error SNMP Trap Send Mail Mail Text Schedule Execution Error SNMP Trap Send Mail Mail Text Lamp Time Alarm Alarm Time SNMP Trap Send Mail Mail Text Description this item.
Page 31
2.5.5 Alert Settings (Continued) Item Filter Time Alarm Alarm Time SNMP Trap Send Mail Mail Text Transition Detector Alarm SNMP Trap Send Mail Mail Text “CHANGE THE LAMP” is displayed SNMP Trap Send Mail Mail Text Cold Start SNMP Trap Authentication Failure SNMP Trap [Apply]...
2. Equipment connection and network setting 2.5.6 Schedule Settings Item Daily Schedule Schedule List Sunday Schedule Schedule List Monday Schedule Schedule List Tuesday Schedule Schedule List Wednesday Schedule Schedule List Thursday Schedule Schedule List Friday Schedule Schedule List Saturday Schedule Schedule List Description Displays the current daily schedule.
Page 33
2. Equipment connection and network setting 2.5.6 Schedule Setting (Continued) Item Description Schedule Month/Day Schedule List Schedule Month/Day Schedule List Schedule Month/Day Schedule List Schedule Month/Day Schedule List Schedule Month/Day Schedule List [Apply]...
2. Equipment connection and network setting 2.5.6 Schedule Setting (Continued) items. Item Time Command Power Parameter Input Source Parameter Display Image Parameter [Register] [Delete] 2.5.7 Date/Time Settings Item Current Date Current Time [Add] Description Description...
Page 35
2.5.7 Date/Time Settings (Continued) Item Daylight Savings Time Start Month Week Hour Minute Month Week Hour Minute Time difference SNTP SNTP Server IP Address Cycle [Apply] NOTE • • • 2. Equipment connection and network setting Description [ON] [ON] [Network Restart] on the main menu.
2. Equipment connection and network setting 2.5.8 Security Settings Item Administrator authority Administrator ID Administrator Password Re-enter Administrator Password User authority User ID User Password Re-enter User Password Description characters. characters. characters. characters.
Page 37
2.5.8 Security Settings (Continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community Name USER Password Re-enter Password [Apply] NOTE [Network Restart] on the main menu. 2. Equipment connection and network setting Description control. characters. characters. to 32 alphanumeric characters. 32 alphanumeric characters.
2. Equipment connection and network setting 2.5.9 Projector Control Item Main Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Picture Brightness Contrast Gamma Color Temp Color Tint Sharpness Active Iris MyMemory Recall MyMemory Save Description Selects the input source. menu.
Page 39
Item Image Aspect Over Scan V Position H Position H Phase H Size Input Progressive Video NR 3D-YCS Color Space Component C-Video Format S-Video Format M1-D Frame Lock RGB in-1 RGB in-2 Setup Auto Keystone Execute Keystone V Keystone H Whisper Mirror 2.
Page 40
2. Equipment connection and network setting Item Audio Volume Bass SRS WOW Speaker Audio-RGB1 Audio-RGB2 Audio-M1-D Audio-Video Audio-S-Video Audio-Component Audio-MIU Screen Language Menu Position V Menu Position H Blank Startup Selects the Startup screen mode. MyScreen Lock Message Option Auto Search Auto Keystone Auto on Auto off...
2.5.10 Projector Status Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze 2.5.11 Network Restart Item Restart NOTE 2.5.12 Logoff 2. Equipment connection and network setting Description Displays the current error status Displays the current power status. Description...
3. How to use Projector software – Basics - 3.1 How to use “MIU Live Viewer” 3.1.1. Install “MIU Live Viewer” Minimum PC Hardware and Software Requirements NOTE • adaptor. NOTE...
3. How to use Projector software – Basics - 3.1.3 Explanation of “MIU Live Viewer”...
Page 47
[“MIU Live Viewer” window: Fig. 3.1.3.a] Start real time display. NOTE clicked repeatedly. task tray. Display Option window. NOTE 3. How to use Projector software – Basics -...
Page 48
3. How to use Projector software – Basics - [“Options” window] [“General” speed. when cursor is not displayed on output screen. Take out check mark to make it...
Page 49
3. How to use Projector software – Basics - Options” ” set compression rate. [Icon in task tray] window.
3. How to use Projector software – Basics - 3.2 Utilize “PC-LESS Presentation” – Basic - Inserting an SD card and USB memory of the Operator's Guide MIU Menu of the Operator's Guide...
Page 53
3. How to use Projector software – Basics - 3.2 Utilize “PC-LESS Presentation” –Basic - (Continued) Caution...
Page 64
4. Utilize projector – Advanced - screen. Remote control Remote control Keypad Remote control Displays the menu. NOTE directories in the memory card.
4. Utilize projector – Advanced - 4.8 Command Control via the Network commands. Communication Port NOTE Command Control Settings [http://192.168.1.10/] [Logon]. [Port settings] on the main menu. to use [Authentication] [Authentication] [Apply]...
Page 76
4. Utilize projector – Advanced - Command Control Settings (Continued) [Security Settings] on the main menu. [Network Control] [Apply] NOTE1 NOTE2 menu. [Network Control [Image Transfer [Network Restart] on the main...
Page 77
4. Utilize projector – Advanced - Command format Reply Error code Send Data format Data Connection Header RS-232Ccommand Checksum length...
Page 78
4. Utilize projector – Advanced - Reply Data format Connection Reply Connection Reply Reply Error code Reply Data Reply Status code Authentication Reply Error code Connection Connection Connection Connection...
Page 79
4. Utilize projector – Advanced - Automatic Connection Break Authentication commands to send. send the data.
5. Troubleshooting that you want to connect to is nowhere on the list communicate rather slow compared to The compression rate Likely Cause Things to Check power mode and then in the correct mode. little. The resolution will drop Reference Page...
Page 81
The compression rate Two cursors appear succession. No cursor appears set. Directory mode. or the memory card is still inserted. There is closely another Others correct or completed respond well. Likely Cause Things to Check drop in speed. mode or Directory mode card that came with your 5.
Page 82
Item Specifications Product name Firmware OS Network Security SD card...
Page 84
Intended Use Before operating this machine, please read this entire manual thoroughly. The 3M indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages. The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector peripheral equipment and/or create a potentially unsafe operating condition.