Table of Contents
Advertisement
HVLP Pressure Verification Kit
For use in checking air cap atomizing and fan
pattern air pressure at various supply air pres-
sures. Not to be used for actual spraying.
Install the kit air cap on the gun. Turn on the air
to the gun, then trigger the gun and read the
air pressure on the gauge.
NOTE: To be "HVLP compliant," the atomizing
and fan pattern air pressure must not exceed
10 psi (70 kPa, 0.7 bar).
Part No.
Description
289563
HVLP General Metal
289568
HVLP High Wear 0.059 in. (1.5 mm)
289569
HVLP High Wear 0.070 in. (1.8 mm)
289566
HVLP Wood
F
. 26: HVLP Pressure Verification Kit
IG
313516F
Inline Fluid Filter 24B707
Filter is removable without disconnecting the
fluid line. Includes housing, o-ring, and
0.005 in. tip filter (equivalent to 100 mesh
screen).
Spray Tip Filters
Final filter to prevent foreign particles from
ruining sprayed surface smoothness.
25-Count
Carton
238562
238564
Tips
Part No. Description
24E484
ti13594a
3-Pack
Description
238561 0.005 in. (equivalent to 100
mesh screen)
238563 0.009 in. (equivalent to 60
mesh screen)
0.030 in. SST Needle Tips (Pack of 5)
Accessories
35
Advertisement
Table of Contents
