Table of Contents
Advertisement
Daily Gun Care
NOTICE
Methylene chloride with formic or propi-
onic acid is not recommended as a flush-
ing or cleaning solvent with this gun as it
will damage aluminum and nylon compo-
nents.
Solvent left in gun air passages could result in a poor quality paint finish. Do not
use any cleaning method which may allow solvent into the gun air passages.
Do not point the gun up while cleaning it.
Do not immerse the gun in solvent.
313516F
NOTICE
ti8100a
ti8101a
Do not wipe the gun with a cloth soaked
in solvent; wring out the excess.
ti4827a
Do not use metal tools to clean the air
cap holes as this may scratch them;
scratches can distort the spray pattern.
ti8175a
Operation
19
Advertisement
Table of Contents
