Model Description; Model Designation - Hatco GLO-RAY GRAIH Series Important Safety Information

MODEL DESCRIPTION

All Models
Glo-Ray Infra-Black Strip Heaters are perfect for foodwarming
® ®
at a close range to food product. Heat from a metal sheathed
heating element housed inside an Infra-Black emitter is
distributed evenly throughout the entire surface area of the
emitter. The emitter gives off a solid panel of heat downward
onto the food product.
Glo-Ray Infra-Black Strip Heaters are constructed with
aluminum housings in lengths of 457 mm (18") to
1829 mm (72").
NOTE: GRAIHL-XXD models are available in lengths of
457 mm to 1676 mm (18" to 66").
Dual models allow for side-by-side mounting of two heating
elements to provide a wider holding area. Dual models are
constructed with a standard 76 mm (3") or optional
152 mm (6") spacer between heating elements.
Glo-Ray Infra-Black Strip Heaters have several mounting
options and switch locations. A thermostatic control box with
indicator lights (TCBI) is mounted on the unit with a thermostatic
control, ON/OFF (I/O) toggle switch, and an indicator light.
Remote control enclosure(s) (RMBs) can be configured with
infinite control(s), ON/OFF (I/O) toggle switch(es), and/or
indicator light(s). Units are available in several optional
Designer colors and gloss finishes.
GRAIH-XX:
Aluminum housing, single element
GRAIHL-XX:
Aluminum housing, incandescent lights,
single element
GRAIH-XXD:
Aluminum housing, dual elements
GRAIHL-XXD:
Aluminum housing, incandescent lights,
dual elements
Figure 1. GRAIH-XX Model with TCBI

MODEL DESIGNATION

Infra-Black Emitter
G R A I H L - XX D
Glo-Ray
Aluminum
High Wattage
Figure 5. Model Designation
Figure 2. GRAIHL-XX Model
Figure 3. GRAIH-XXD Model with TCBI
Figure 4. GRAIHL-XXD Model
Dual Elements
Width (in inches)
Incandescent Lights
4
.
.
Form No. GRAIHCEM1-0111