Table of Contents
Advertisement
Programming
4
MbN: Select the desired setting. a MOKN
2 times
5
MeN
Incoming call barring (Caller ID
subscribers only)
Available for:
KX-TG7861 series (page 3)
KX-TGA786E (optional handsets): (page 4)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit emits no sound to the caller, and
disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list (page 14)
with
after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MCN ( )
2
MbN: Select the entry to be barred. a
M
N a M
N
3
MbN: "Save CID" a MOKN
4
MbN: "Caller Barred" a MOKN
5
MbN: "Yes" a MOKN a MeN
n By entering phone numbers:
1
M
N (right soft key) #217 a
M
N
2
Enter the phone number (24 digits
max.). a MOKN
R To erase a digit, press MCN.
30
TG78xx_79xxE(en)_0407_ver112.pdf 30
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
3
MeN
Viewing/editing/erasing bar call
numbers
1
M
N (right soft key) #217
2
MbN: Select the desired entry.
R To exit, press MeN.
3
To edit a number:
M
N a Edit the phone number. a
MOKN a MeN
To erase a number:
M
N a MbN: "Yes" a MOKN a MeN
Note:
R When editing, press the desired dial key to
add, MCN to erase.
Nuisance call block (Caller ID
subscribers only)
Available for:
KX-TG7921 series (page 3)
This feature rejects calls from unwanted
callers. The following items are available when
storing phone numbers in the call block list (30
max.).
– "Single Number": The unit can reject
calls from specific phone numbers.
– "Range of Numbers": The unit can
reject calls that begin with a number stored
in the call block list, such as a toll-free
phone number prefix or certain area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller's phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call block list,
the call is logged in the caller list (page 14)
with
after the call is disconnected.
R If the KX-TGA786E (optional handsets) is
registered to the KX-TG7921 series, the
2015/04/07 11:32:51
Advertisement
Table of Contents
