Setting Up the Projector
24
Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use the
component-to-VGA video adapter that came with your projector and
a component video cable, or you can purchase a component-to-VGA
video cable from Epson (see page 15) or an electronics dealer.
1. Connect one end of your component video cable to the Y/Cb/Cr
(or Y/Pb/Pr) connectors on your player.
2. Connect the component end of the component-to-VGA video
adapter to the free end of the component video cable.
3. Connect the VGA end of the adapter to the
(Component Video)
Computer (Component Video) port
4. You may need to change the
projector's Signal menu to
5. If you want to play sound through the projector, see page 28 for
instructions on connecting an audio cable.
When you've finished making connections, see page 30 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Computer
port on your projector.
setting in the
Input Signal
(see page 50).
Auto